Raise Me Up!

Those 3 words always make me think of Joshie Groban's amazing song You Raise Me Up.  Oh and yes I know his name isnt Joshie but thats what I like to call him around the house because he's so cute like a little boy he is just Joshie...dont judge :)

I have a great project to share with you today!  This one has been on the list for a while because, well the materials had the potential to be expensive.  Lucky for us we were able to scrape together all the supplies and not have to spend a single penny.  So this project is technically free, but if you had to buy the materials I would guess the total to be around $100.

This past weekend we built a platform for our media room.  The platform is so that we can have 2 rows of seating, with the back row able to see over the 1st rows heads.  First we had to measure the space, so length and height was easy.  Height needs to be the same height as a stair which is 7inches (FYI) and the width was wide enough to walk around on one side and even with the column in the room on the other.  The width and length will be specific to your room requirements but the 7inches is kinda standard.  For the width I sat in my popisan chair (from pier 1...i love that thing) and Joe measured to about where my feet stopped.  That way I can sit in the chair without kicking the chair in front of me, smart right?!  Because lets be honest, aside from someone talking on their phone during the movie, the second worst thing is being kicked in the back of the chair.  Always pisses me off.

Now that you have your measurements go and get your materials.

 This wood is framing wood that was leftover from a construction site.  It was really long and that was great since when we got it we didnt know what our final measurements would be.  You can use regular 2x4's or whatever length you need...I havent had to buy wood like this in a while so I forget how they come.

You will also need sheets of plywood.  1inch thickness is the best since you are going to be walking/sitting/standing on this wood and you need it to be a little sturdier than other projects.  This was also leftover from the site and let me tell you this stuff is heavy so be prepared to have a helper so you dont kill yourself.  This will also be the more expensive part of the project.  My dad who does small time carpentry says this stuff is about $40/sheet (you can see why we were putting this project off since we needed 2 sheets).  Make sure you get enough for your dimensions, and for us that meant 2 sheets.

You will also need carpet if you want a finished look, or you can put a rug down or you could just stain it.  That part is really up to you.  Again, at a different construction site, we found a whole roll of carpet in the trash pile...well baby it was the exact same color and texture as our carpet so we snagged it!  Awesome right?!

Now I bet you want to know how to put it all together right.  Ok.  So first you need to build the frame.  That part is pretty easy, you are just going to make a box with your framing wood.  Oh and to make things easier on yourself you probably will want to use a nail gun for this since you are going to have to hammer really deep on this part.  Of course if you are Hercules then no big, but most of us arent so the nail gun is probably best.

After you get the frame done you need to add support beams down the middle and down the length so that it doesnt cave in on you.  Im not calling you fat, but we all could use a little support you know :)

Oreo had to make sure the boys were doing what they were supposed to be doing.  Dont ask me why the boys did the supports the way they did, if it was up to me there would be the 2 long ones going the whole length and 3 more going down the width, but no one asks the wife so I just let them be since they are making this monster.  If you want to have this as a permanent structure screw the platform into the floor.  To do that at the edges screw a screw in at an angle so that it goes through the wood and into the floor as well.  Make sure the supports are nailed in really well also and now you are ready to add the top.

Probably the easiest part...put the plywood on top of the frame and nail it down.  You might have to cut one of your pieces of plywood like we did here but thats not too bad if you have a circular saw.  Make sure when you are nailing you are nailing into the support wood and not into nothing because that would be pointless.

Are you ready to carpet that bad boy?  Looks pretty cool right.  Cant even tell that the carpet isnt the same type.  To put carpet on lay the carpet out over the platform and line it up evenly.  Start stapling with a staple gun being very careful to staple as close to the bottom as you can so you cant really see the staples.  When you get to the edge curl the bottom and cut it a little past the edge so you can squish the edge behind the next edge you are going to work on.  make sure you pull tight as you go and do the same thing all the way around.  Once you get the carpet night and tight and stapled down you are done!  Of course you could paint or use a rug but thats the last step yay you are done!!  Looks pretty cool right?!  I cant wait to get more furniture up there and start making it look like a real media room.

What did you work on this weekend?

Project Housewife Out!

Im Linking Up!  Come check me out at Positively Splendid, Add a Pinch, Flour me with Love, Romance on a Dime, A Bowl Full of Lemons, DIY By Design, My Girlish Whims, Newlyweds on a Budget, Tip Junkie, Ginger Snap Crafts, Southern Lovely, Lil Pink Pocket, Michelle's Tasty Creations, House of Hepworths, Beyond the Picket Fence,

Pallet of Colors

I have a confession...I may be slightly addicted to pinterest.  Im sure most of you are too, its a sickness that makes me want to spend all my money on cute ideas.  While I was trolling pinterest, I saw this really cool looking headboard

Source

So cool right!  Well I already have an awesome headboard (which you can see here) but I need some cool wall art for on either side of my TV and I thought this was simple enough to do the trick without overpowering the TV.  Now let me should you my before shot

No bad, but not good enough for me.  So now I can show you the project!!  I got the inspiration to use pallets from here.  But I wasnt crazy about the flowers I thought that might be too busy for the TV area so it was a blend of ideas to creat my final project, which see below for the after!!

Yes I am about to watch Once Upon a Time, and why arent you its an awesome show!

I think it brings a lot more color to the roon and is just a little cooler to look at...what do you think?

Ok on to how to make this baby...first you need a pallet.  My husband works for a plumbing supplier and they have loads of pallets so that was totally free yay!  So before I get down to the nitty gritty...here is what you are going to need

• 1 pallett---all of the pieces (free)
• paint of your choice, varying shades (free)
• crobar (free)
• saw (free)
• nail/hammer (free)
• painters tape/paint brush ($5)
• pencil/ruler (free)
• screw/wire (for hanging) (free)

Total cost for this project...$5!!!  What, thats amazing!!

Looks kinda ugly right?  Well dont worry we are painting it so no worries.  Now you have to get the boards off, and if you have a cro-bar that would be best. Joe had to use a hammer and that was pretty hard so if you have a crobar make it easy on yourself.  Below are the boards cut down to the measurements I gave Joe.  I wanted the project to be 15wide by 30 long, so I plank from the pallet was long enough for 2 strips.  You can also see from the picture here that we used the pallet support beams as cross beams for the art. 

Here it is all put together ready for paint.

I first thought to whitewash it (I hadnt decided if I wanted to do the color blocks or the flowers yet) and that turned out pretty well, and I think also helped with the paint.  It was kinda like primer but didnt bring up all the pulp that comes out of the wood when you use regular primer (more to come on whitewashing later)

I let these sit overnight to make sure the paint had set.  The next day I started taping out the lines for the stripes.  I wanted each pallett art to be different so I measured the stripes at different heights.

I used a paint stirrer as my guide and a pencil to do the initial lines then went back and put painters tape over the lines.  Remember that where you put the tape you cant paint otherwise you will have gaps between the stripes so be mindful of that when you put the tape down.  You can see below what I did to make sure I kept that straight.

Now you have your painters tape down get to painting.  I had plenty of leftover paint from the walls and color samples so that was free too!

Let that sit overnight so that when you put the second layer of painters tape down it doesnt pull off you paint you just did.  Once it has dried and you get your second tape down, paint again.

Wait for the paint to dry and remove the tape.  Now if you are like me you will have to do some touch ups, but if you have one of those sponge paint brushed that has a stright edge this is pretty easy.  Once its dry, you can screw your screws and wire into the back of the boards and hang them up!  Make sure you use an anchor when hanging these babies are pretty heavy!

Pretty easy, pretty cheap and pretty fun too!  I feel like an artist enough though I cant draw to save my life!  DO you have a space that this art would be perfect for?  Let me know, and what do you think of this art?  Should I leave it or do the flowers pallet art?  I think I need a second opinion

Project Housewife Out!



Im Linking Up!  Come check me out at A Bowl Full of Lemons, I Heart Organizing, Southern Lovely, Lil Pink Pocket, Vintage Gwen, My Girlish Whims, Beyond the Picket Fence, House of Hepworths, Bacon Time, Addicted2Decorating, Six Sisters Stuff

         

Custom Headboard

A little over a year ago my husband and I moved into our first HOUSE...not an apartment, not a town home but a real brick house.  We were so excited to finally have a real place to call ours and only ours.  The only drawback was there were so many rooms I just didnt know how I was going to fill each room, but one thing was for sure, I wanted a new mattress...a KING mattress.  For those of you sleeping on a queen right now you can relate to this.  My husband is not a small man, so on the queen bed I was lucky to have 1 inch to call my own space.  I really hate being touched when Im sleeping, yes I know Im crazy but thats just how I am.  So this queen bed was a NIGHTMARE for sleeping, plus the mattress was way past the "8 to replace" so I justified it that way too.  Well let me tell you, we went to Mattress Firm and go a Latex/Memory Foam hybrid mattress and O...M...G it is like heaven on earth.  It does get hot at night, but Ill take sweaty for a back that doesnt hurt in the morning.  So anyway, I have this big awesome king sized mattress (for under $700 by the way) and no frame to go with it...ok I have the ugly metal thing from the mattress place but no pretty headboard and what is a room without a bed set.  I was looking in Potterybarn's magazine (always a bad idea if you are looking to furnish a home on a budget) and saw this awesome headboard for $1200.  I wanted to share a link with you but I dont think they make it anymore because I cant find it.  Well I didnt have $1200 to spare so I thought it would be brilliant to make our own, I mean my dad is handy with carpentry, and my husband (at the time) is always up for a project, so we set out with the plans.  I searched online for a great tutorial but there really wasnt one, but I did find one on how to do the tufting so I went with that and let the boys do the cutting on their own. 

I have been sitting on this post for a while because honestly I didnt want to type everything out and I didnt have step by step pictures to show and this really does need step by step pictures.  Well wouldnt you know, over at Schue Love they did the exact same thing (sort of) and had the tutorial for you.  I wanted to link up to their site so you can check out Schue Love's amazing site and see her far superior job of tufting.

You can see mine here isnt really tufted, see the girls at Schue Love are so smart, they used zip tipes to hold the tread in place.  Well I have to tell you I had a few bloody fingers that day from trying to hold the string REALLY TIGHT to get the tufting look and then stapled, yes thats right I said stapled, the tread to the back of the headboard.  It was not easy, it was frustrating, and in the end it didnt look 100% like I wanted it to, but I made it from scratch and I was proud of it.  I wanted to add my own notes to the Schue Love tutorial so check them out and then check my notes.

First, I wanted the awesome Potterybarn pattern for my headboard so we sketeched it out paper then went to the plywood.  An awesome trick to make perfect circles is tie a string to a pencil, hold down one end of the string to the center of where you want the circle and then the end that has the pencil you draw your circle.  Really cool right!  Well doing the half circles and straight lines was a little harder to make them perfect but it took a lot of measuring and eyeballing.  I totally stand by the mantra "Measure twice cut once".  Dont ever forget this because it will save you so much money in wood (which is more expensive then I remember)!  Once everything is traced get the jigsaw and get going!  We used a jigsaw because of the non-straight lines we had on the headboard, but it you are just going to do a square you can just use a regular saw (its easier and faster than the jigsaw trust me)

While the boys were outside cutting the wood I was inside prepping my "upholestry station".  I found this beautiful white micro-suede in the upholestry section of JoAnn's and bought 6 yards of it (we all know I buy WAY too much fabric, I ended up only using about 3yards).  I first laid down the fabric face down, the added the egg crate mattress pad thing...do you guys know what Im talking about?  Its the  yellow thing that is at walmart that goes on your bed to help with your back.  Well rather then spending the hefty price tag of the padding at JoAnn's I bought one of those to use as the padding.  In retro-spect I should have gotten 4 to make the padding ticker but I bought 2 (I needed each to sit next to each other so I could get it wide enough for the headboard).  Also while I was at JoAnn's I found some awesome clear crystal buttons that I thought would be so much more fun than upholstered buttons on the headboard so I got those too.

Back on track, so I have the fabric and the mattress pad laid out, now I put the plywood on top and get to cutting.  I start cutting around headboard, not listening to the mantra I just told you to never forget.  I think thats why my tufting didnt come out super great.  Like I said go to Schue Love , they have a much better tutorial on how to do the tufting but let me share my mistakes with you.  First was I cut the fabric and then second was I stapled the fabric to the back of the headboard before I did the tufting.  You can see from the other tutorial that they didnt cut the fabric or staple the fabric until AFTER they did the tufting.  Im realizing that now and kicking myself for not doing that.  But I do love my headboard and I did it pretty much without any instruction.  This was also pretty much my intro to home projects and I have to say Im proud of it.  Evern though there are things I could have done better, there are things I could have done much worse too.

I bet your wondering how to hang this bad boy...Well I'll tell you, you need special hardware and its hard to find it.  Eventually we found it at Ace Hardware.  I dont remember the name but its interlocking plates.  One plate is screwed into the wall and the other is screwed into the headboard.  You will want to get 2 sets to have one plate set on each side of the headboard to make it super escure.  WARNING: its pretty hard matching this plates up headboard to wall so be patient and definately have someone help you because two people are usually better than one.

I hope you enjoyed this post and are super PSYCHED to get started on your own headboard!  Have you made a headboard?  I would love to see what you came up with, share it here!!

Project Housewife Out!